Filter
Top Products
61 -
Problem Possible cause Remedy
Some players do not play discs with fi nalisation in
video mode.
No solution.
The disc was recorded in VR mode. The other player must be RW-compatible
The ability of CD-R / RWs (MP3/WMA, JPEG,
(X)VCD, (X)SVCD) and DVD+R / RWs and DVD-R
/ RWs is infl uenced by the recording equipment,
recording methods and data media. Therefore,
there may be problems occasionally when playing
on conventional DVD players..
No solution.
Playback not possible or unsuccessful. There is insuffi cient space on the disc. Use a different disc
The source that you want to record is copy-pro-
tected.
You cannot record the source
Copy-protected broadcasts cannot be recorded on a
video mode disc.
Use a disc formatted in the VR mode for once copiable
material
Timer recording not possible. The time has not been set correctly on the DVD
recorder.
Set the correct time. See “Setting the time automatically“ or
“Setting the time manually“ on page 20.
The timer was wrongly programmed. Re-program the timer. See “Timer recording“ on page 45
The time between programming the timer and the
start of recording is too short.
The recording‘s start time must be at least 3 minutes into the
future.
After programming, the timer recording LED is no
longer displayed.
Re-program the timer.
Stereo-audio recording and/or playback
unavailable.
The television is not stereo-compatible or the
broadcast transmission is not in stereo format.
No solution.
The DVD recorder’s A/V Out sockets are not con-
nected to the TV’s A/V In sockets.
Make the A/V connections.
The DVD recorder’s audio/video Out has not been
selected for the television.
Select the AUX or A/V source as the TV input.
The DVD recorder’s TV audio channel must be set
to Mono.
Set the TV’s audio channel to stereo. (see page 44)
The remote control is not working properly. The remote control’s batteries have run out. Replace the old batteries with new ones.
What to do, if ...