Filter
Top Products
Clock Setting (cont’d) 31
Time/Date Manual
If the Recorder does not set the time and date correctly using the
Time/Date Automatic feature, set the clock manually by following the steps
below. Manual clock setting overrides Automatic clock setting.
● Make sure the Recorder is in DVD mode. Press DVD so the DVD light
appears on the front of the Recorder.
1
Press SYSTEM MENU. Press s to select in the top left
corner of the menu bar at the top of the TV screen.
2
Press L repeatedly to select at the end of the
second menu, then press B to enter the Installation menu.
3
Press L repeatedly to select Time/Date, then press B.
4
Press L to choose Manual, then press B.
5
Time will be highlighted. Press s or B to choose the correct
time in hours and minutes, then press OK. Or, press the
Number buttons to quickly enter the time in hours and minutes,
then press OK.
6
Press L to choose AM/PM, then press s or B to choose
AM or PM. Press OK.
7
Press L to choose Year, then press s or B to choose the
current year. Press OK.
8
Press L to choose Month, then press s or B to choose
the current month. Press OK.
9
Press L to choose Date, then press s or B to choose the
current date. Press OK.
10
Press L to choose Daylight Saving, then press s or B to
choose On or Off. Press OK.
11
Press SYSTEM MENU repeatedly to remove all menus.
Time/date
Manual
K
u Time s04:01 B
L
AM/PM PM
Year 2004
Month 06
Date 19
Daylight Saving On
To exit press
SYSTEM MENU
•
In order for the clock to remain
set as you specified manually,
you may need to set Daylight
Saving to Off.
• If you set up channels again as
described on page 28, you may
need to reset your clock.
• If you change any item
manually (Time,AM/PM,Year,
Month, Date, Daylight Saving),
PBS Channel will change to Off
automatically. See page 30.
Helpful Hints
1-10
1,11
E9490UD_EN.qx3 04.9.21 10:54 AM Page 31