Filter
Top Products
One-Touch Recording (VCR) 71
•
The remaining recording time will
appear on the VCR display panel
during an OTR. Press DISPLAY to
see it on the TV screen.
•
To change the recording length
while an OTR is in progress,
press VCR REC
I repeatedly.
•
You cannot pause an OTR.
•
If the end of the tape is reached
during an OTR, the VCR will stop
recording and eject the tape.
Helpful Hints
One-Touch Recording (OTR) lets you set a timed recording 30 minutes to
eight hours long of the current TV channel. Before you begin:
● Place the Recorder in VCR mode. Press VCR so the VCR light appears on
the front of the Recorder.
● Select a recording speed (SP, SLP) with the REC SPEED/MODE button.
● Put a videotape in the cassette compartment. Make sure the tape’s
record tab is intact and the tape is long enough to record the
program(s).
1
Press VCR, then press CHANNEL +/- or the Number
buttons to select the channel you want to record.
2
Press VCR REC I repeatedly until the desired recording
length (30 minutes to eight hours) appears on the TV
screen.
Recording will begin. REC will appear on the VCR display
panel.
Stopping an OTR
To stop an OTR before recording is finished, press STOP C on the remote
control or STOP C / EJECT A (VCR) on the front of the Recorder.
To cancel the OTR but continue recording, press VCR REC I repeatedly until
only I appears in the upper left corner of the TV screen.
1
2
1
E9490UD_EN.qx3 04.9.21 10:54 AM Page 71