Filter
Top Products
Night Mode, Remote Control Used 67
Remote Control Used
1
Press SYSTEM MENU. Press s to select in the top left
corner of the menu bar at the top of the TV screen.
2
Press L repeatedly to select in the second menu screen,
then press B.
3
Remote control used will be highlighted. Press B.
4
Press K or L to select DVD Player or DVD Recorder,then
press OK. The factory setting is DVD Recorder. By selecting DVD
Recorder, you choose to operate the Recorder with its supplied
remote control (as shown at right and throughout this book). If you
have a Magnavox DVD Player and want to use its remote for the
Recorder, select DVD Player.You might not access all the Recorder’s
features unless you use the Recorder’s remote.
5
Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off
~
Remote control
Remote control used s DVD Player L
DVD Recorder
Night Mode
Turn on Night Mode to improve the sound during low volume playback.
● Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Press SYSTEM MENU. Press s to select in the top left
corner of the menu bar at the top of the TV screen.
2
Press L repeatedly to select G, then press B.
3
Press L repeatedly to select Night mode, then press B.
4
Press K or L to select On or Off,then press OK.
5
Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off
Sound
Digital output
G
Analog output
Night mode s On L
r
Off
~
1,5
1- 4
1,5
1- 4
E9490UD_EN.qx3 04.9.21 10:54 AM Page 67