Filter
Top Products
User Guide
14
RC5400 provides different modes. For customizing your RC5400
you have to switch to the appropriate mode via the Mode Menu
page.
The mode menus are utilized like this:
1 Tap and hold the MODE icon more
than 3 seconds in the LOWER TOOL
BAR. The Mode Menu page will appears.
2 Select the mode you wish to use to
customize your RC5400 by tapping the
appropriate button on the Mode Menu.
When you operate your devices, the
RC5400 is in USE mode.
For actions other than operating (like
learning IR commands, recording macros, adding devices, and so
on), you have to switch to the appropriate mode:
For learning IR commands from other remotes. (Page 26)
For labeling buttons, pages and devices. (Page 30)
For adding new devices and copying existing devices. (Page 33)
For deleting buttons and devices. (Page 37)
For changing the order of devices in the device overview. (Page 39)
For selecting the commands sending mode IR or RF. (Page 40)
For recording and editing macros. (page 44)
Getting Started
6. The Mode Menu