Filter
Top Products
User Guide
25
12 Typically you will need to adjust the timing of the macro. Simply
putting in lots of delays will make the macro work, but may
make the macro unnecessarily long.
Try moving commands, so that a TV command alternates with
another component command before another TV command is
issued. To move a command, simply select it and use the
and buttons to reposition it within the Macro page.
When a delay is added to the macro, the default timing is 0.5
seconds. If the macro works with a 0.5 second delay, try a
smaller delay to shorten the macro.
When programming Channel number macros, use 0.1 second
delays between different digits and 0.5 second delays between
identical digits.
13 Once you are happy with the macro, press the Done button on
the screen to save it.
14 Continue to program macros until you have recorded all that you
plan.
Congratulations!
You are now a Home Theater Automator!
Customizing Your RC5400