Filter
Top Products
User Guide
20
1 Write a list of all of the actions in the operation you want to
record.
2 Gather all of the remote controls you will need for the operation.
3 Select ADD from the Mode menu. Choose “Copy Existing
DEVICE” when prompted (see page 33-36).
In the device list, there is a device labeled “Help .
Tap it to add the Help device.
4 Switch to LABEL mode. Relabel the new device currently
labeled Help 1 (for details on relabeling devices, see page 30-
32).
Try to use a descriptive title like POWER, RECORD, etc.
5 Stay in LABEL mode. Relabel as many of the buttons on the
five pages as you need.
Tip Do not relabel the buttons labeled “Press for More ....” unless
the button is the last step in the operation.
6 Switch to LEARN mode. Teach each button the appropriate
command.
7 Switch to MOVE mode. Move the new device to the appropriate
position in the device list (remember, this determines the button
position on Device Overview page).
8 Return to USE mode and test out your new list.
9 You can make as many Help lists as you like. Simply repeat
steps 1 through 8 for each operation you would like to program
a help list.
Customizing Your RC5400
4. Programming Help List