Maxtor NVR-2028 DVR User Manual


 
8
A-rec Indicator:
This indicator of the alarm recording mode lights up to indicate the alarm record setting is on.
DISK Indicator:
The indicator shows the operation status of the unit’s hard-disk drives. The green light indicates the
hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up. The
orange light indicates the hard-disk is retrieving at disk-full status.
Shuttle Ring:
The shuttle can be moved forward and backward for playback in either direction. Turn this left to
play a recorded video in the reverse direction at faster or slower speeds than the recorded speed.
Turn this right to play a recorded video in the forward direction at faster or slower speeds than the
recorded speed.
Jog Dial:
This dial can act in both a forward and a backward direction, as well as step by step. Turn this left
to play a recorded video in the reverse direction. Turn this right to play a recorded video in the
forward direction.
POWER Indicator:
Indicates the power status of the unit. The green light indicates the hard disk drive is
activating. The
orange light signals the hard disk drive is power stand by.
Mobile Rack Power LED:
Indicates the power status of the Mobile Rack. The green light indicates the Mobile Rack is
activating.
Mobile Rack HDD LED:
Indicates the HDD status of the Mobile Rack. The orange light indicates the HDD is storing or
retrieving data.
NOTE: Press “ Enter ” and “ Shift ” simultaneously in order to view all the channels, one by
one, in sequential single-channel succession, followed by an 8-channel display, a
quad-mode display of channels 1-4, and channels 5-8, and then a multiple-channel
viewing, after which you have this exact same sequential order of display indefinitely.