Filter
Top Products
24
4.3 Playback Operations
This section shows you how to operate the fast, slow, and single-picture playback functions, and details
how the unit is to playback a file in a different operation status. Please refer to the following paragraphs
specifying the relevant details. When playing a file, the monitor should display a flashing PLAY
message and the PLAY button
will light up indicating that the NVR is in the playback status.
Operation Status
A. From REC mode to Playback mode
(In live mode, directly press the PLAY button
to play a latest recorded video)
REC→〔 STOP〕→ 〔 PLAY〕……………………………… Play the latest recorded file
〔Play to the end of the file〕…Show the ending message (use search functions or
rewind to replay the file if required)
〔STOP〕→〔PLAY〕…………Play the file from the stop position
B. Search to play back a particular recorded video
Search→〔PLAY〕………………………………………… Play a selected file
〔Play to the end of the file〕…………Show the ending message (Search again or rewind to
replay the file if required)
〔STOP〕→〔PLAY〕…………………Play the file from the stop position
4.3.1 Fast Forward/Reverse
There are 7 speeds available for playback: 1x, 2x, 4x, 8x, 16x, 32x and 100x
While playing back recorded video at recorded speed:
Forward: Turn the Shuttle dial
to the right to view the recorded video in the forward direction at a
speed faster than the recorded speed. Each subsequent turn of the shuttle to the right
increases the forward rate, as 2x, 4x, 8x, 16x, 32x and 100x.
Reverse: Turn the Shuttle dial
to the left to view the recorded video in the reverse direction at a
speed faster than the recorded speed. Each subsequent turn of the shuttle to the left
increases the reverse rate, as -1x, -2x, -4x, -8x, -16x, -32x and -100x.
Normal: Release the Shuttle dial
to return to the normal speed of playback.