Filter
Top Products
81
11.4 Change Schedule Setting
Please follow the steps below to change the Timer Record setting through the network as and when
necessary.
1. Click the
button on the home page to enter the setup mode.
2. Click the
connection on the setting page to enter the Timer Record setting
page.
3. Set the SCHEDULE RECORD to ON to enable the SCHEDULE RECORD function.
4. There are two time-periods available for scheduling each day. The Timer Record setting page
allows users to program the time each day that the NVR will start and stop recording. The time
is displayed in a 24-hour clock format. If there is a time overlap showing between two continual
time-period settings, the device will automatically combine the two time-period settings into one
combined time-period setting.
5. Click the
button to submit the new Timer Record setting.
6. Click the
button to return to the home page while the new image setting acts on
the images to effect the desired changes instantly. (If the setting has not been changed by the
above steps, any (re)entry onto the home page will find images in their earlier or original
setting. )