Maxtor NVR-2028 DVR User Manual


 
4
1. PRODUCT FEATURES
1.1 Product Introduction
The WIRELESS NVR-2028 is a storage media of digital video image, which uses hard disk drives
instead of NAS devices to store video. This wireless storage media provides the user with the power
of remote control of the Internet. It’s an extremely stable and reliable device because it is a
stand-alone system. Its local operations are very similar to the DVR’s interface; hence if the user is
familiar with the DVR s/he will find this media to be most convenient. You don’t need to design any
analog lines yourself, just use the current existing wireless network function since the device is a
digital one. Again, where the NVR-2028 is an active device, which automatically, instantly and
directly detects all events without having to detour via the LAN Camera.
Additionally, with the NVR-2028 you don’t have to rely on a PC to save any images, because this
device has done so already, being the best possible storage media for the LAN Camera.
The device additionally hosts a wireless access point (AP), so you can transmit data without a
connecting cable. If, for example, you don’t want to use a connecting cable in an old building that is
within your surveillance system, you can use the wireless NVR-2028 instead. The same applies
equally to other sites you’re covering.
The wireless NVR-2028 also has the NAT function to enable direct access to the Internet. Inside the
device is a Router, so you don’t need to buy one as well.
1.2 Product Features
Wireless access, complies with IEEE 802.11g/b.
Digital recorder for LAN the Camera.
Maximum link-up of 8 LAN Cameras.
Zoom in/out available for every LAN Camera.
Compression method: MJPEG.
Maximum 2 hard-disk drive capability. (One removable)
Hard-disk drive hot-swapping capability.
Pre-alarm image recording.
Capable of backup with various known FTP server.
Time-lapse and real-time recording.
Refresh rate up to 30 IPS (25 IPS for PAL).
Alarm I/O.
Image quality selectable at 5 different levels for recording.
Event/Timer/Alarm recording mode.
Quick search by time, alarm, event, and recording list.
Fast and slow playback of recorded video at various speeds.
Single-picture playback.
On-screen setup menu, title and system timer.