Filter
Top Products
Network Stand Alone DVR
Network Stand Alone DVRNetwork Stand Alone DVR
Network Stand Alone DVR
Network (JPEG2000+H.264)
Network (JPEG2000+H.264)Network (JPEG2000+H.264)
Network (JPEG2000+H.264)
67
•Key Release for PTZ function
PTZ functionPTZ function
PTZ function
pow er on , light on
pow er on , light onpow er on , light on
pow er on , light on "1"
pow er off , light off
pow er off , light offpow er off , light off
pow er off , light off "2"
iris open
iris openiris open
iris open "3"
iris close
iris closeiris close
iris close "4"
focus near
focus nearfocus near
focus near "5"
focus far
focus farfocus far
focus far "6"
zoom in
zoom inzoom in
zoom in "7"
zoom out
zoom outzoom out
zoom out "8"
set preset
set presetset preset
set preset "9"
clear preset
clear presetclear preset
clear preset "0"
goto preset
goto presetgoto preset
goto preset "!"
auto scan
auto scanauto scan
auto scan "@ "
tilt up
tilt uptilt up
tilt up "u"
tilt dow n
tilt dow ntilt dow n
tilt dow n "j"
pan left
pan leftpan left
pan left "h"
pan right
pan rightpan rig ht
pan right "k"
"& Z "
"& Z ""& Z "
"& Z "
•To stop transmitting the signal to DVRs via RS232
1) Set preset
"T“ → “U”, "J", "H", "K" (To move where you want to see) → "9"( set preset ) → "&Z“ ”Enter”
→ "&+“ ”Enter”, ”&-“ ”Enter” (To set other preset point)
2) Clear preset
"T“ → "0" → "&Z“ ”Enter” → "&+", "&-" (To choose which you want to delete ) → “Enter"
3) Goto preset
"T" → "!“ → "&Z” ”Enter" → "&+“, "&-“ ( To choose where you want to see ) →
“Enter"
※
※※
※ Reference
1.Funtions where the OSD [xx] to the right of the function is not seen pressing "1" or "2" will bring
it up.
2.Operations such as 'clear preset' take affect upon pressing the ‘0’ key causing the last preset to
be deleted even though that may not be the desired action. Instead use the next key 'N' until 'clear
preset' is up then choose the preset to be deleted followed by enter.
3.For units lacking a front panel jog shuttle the '15/F3' and '16/F4' ASCII front panel equivalent can
be used.
”Enter”
CHAP. 9 Programmer reference