Filter
Top Products
Microboards Technology, LLC
16
Microboards B.30
14. AutoCopy
Microboards B.30
15. Shutdown
5. Password on Bootup
To use the Managed Accounts Users to limit access to the duplicator, you must turn
the Password on Bootup setting to YES. This will take effect the next time the
duplicator is turned on.
You must use either the Save function in the Utilities menu or the Shutdown function prior
to turning the duplicator off, or changes you have made to the accounts may not be saved!
AutoCopy
If you have a DVD Premium or the External connection is On,
the display will show this menu item as 13, not 14.
The AutoCopy function simplifies the copy process. After the initial round of blanks is burned,
you only need to load the drives again and close them. Once the drives detect the new blank
media in the drives, duplication begins without you having to touch the control panel (Auto Start
must be set to Auto or Full).
Shutdown
If you have a DVD Premium or the External connection is On,
the display will show this menu item as 14, not 15.
When turning off your DVD Premium Pro Duplicator, it is highly recommended that you do so
using the Shutdown menu option. Not only does this function save any system settings that you
may have changed in the Setup menu, it also shuts down the duplicator components in a safe
way.
When the display reads Ready to Power OFF after selecting the Shutdown function, you can use
the power switch on the front.