Filter
Top Products
DVD Premium & Premium Pro Series
5
Introduction
The DVD Premium and Premium Pro Series includes models containing 3, 5, 7, and 10
recorders. The Premium Pro Series includes an internal hard drive for convenient master
storage.
Each is a high speed CD and DVD Recordable duplication system from Microboards Technology,
LLC.
Regardless of the number of drives, the DVD Premium or Premium Pro is perfect for any user
requiring easy copying of audio, video, or Data DVD/CDs. The 2-line 20 character LCD display
panel provides the user with status of the duplication process, the type of process being run,
master size, and other useful information.
Applications suited for the DVD Premium Pro include Pro Audio, Multimedia, Government /
Education, Software Development, Medical Imaging, and Data Interchange.
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
• DVD Premium or Premium Pro duplicator
• Power cable
• USB cable
• NetConnect Installation Disc (PC) & CopyConnect Installation Disc (Mac)
If any of these items are missing, please contact Microboards Technology Technical Support.
IMPORTANT: Please keep all the packing for your DVD Premium Pro duplicator. If your unit
ever needs to be sent in for service, it must be returned in the original packing or the warranty will
be voided.
Installation
• Connect the supplied power cable to the DVD Premium Pro duplicator and plug in to a
protected power outlet strip or UPS power supply.
Note for Installation:
1) Please verify that the voltage switch above the power connection is set correctly for
your local power specifications.
2) The socket outlet should be installed near the equipment and be easily accessible.
3) Do not block cooling fans.
• Turn on power to the duplicator.
• The system will go through initialization and then display: 1. Copy.
• For the Premium Pro Series, install the NetConnect application and drivers on any PC or
CopyConnect application and drivers on any Mac that may be accessing the hard drive in
the duplicator. These are necessary for your PC or Mac to recognize the duplicator hard
drive’s format.
• For USB Mode, connect to a PC or Mac via an unoccupied USB port. To access the
drive, the External Connection mode must be turned ON in the Setup Menu (See page
18).
• The system is now ready to use.