Filter
Top Products
DVD Premium & Premium Pro Series
21
• If the Status reads Remote Occupied, the hard drive is
in use by another PC. The Connect Device button will
also be disabled. The Ethernet connection will only
allow one PC to connect to the hard drive at a time.
• If the hard drive is in use by another PC, you can request that the user disconnect by
selecting Request Disconnect Device from the System menu. This will send a
message to the PC that is currently connected to the hard drive requesting that they
either disconnect or decline the disconnect request.
3. The status will change to Locally Connected and the
Connect button to Disconnect Device to indicate that the
connection has been made. The hard drive will now be
accessible on your PC through Windows Explorer as a
new hard drive named Duplicator.
4. Your image files and directories can be placed into the Duplicator\dup directory using a
simple copy and paste in Windows Explorer. The files can also be created in the correct
directory location.
Disconnecting the Hard Drive, Ethernet Connection
When you are ready to return control of the hard drive to the Pro Series Duplicator, or if you need
to allow another PC to access the hard drive, use the same process as disconnecting from a USB
connection, then click the Disconnect button in the NetConnect application before turning OFF
the external connection on the Pro Series Duplicator. The Network Duplication Control software
can be shut down at that time and the files will be accessible on the duplicator.
CD+G Support
This feature allows CD+G content to be copied from master disc to blank CDs. The default is
OFF.
Please note that the Mix Audio Tracks function cannot be performed with the CD+G Support
setting ON.
Overburn
This feature allows you to turn the ability to use the overburn area ON or OFF. Only CD-RW
burning will be affected by this setting.
Overburning is the process of recording data past the normal capacity limit. Many disc
manufacturers extend a recordable disc to leave a small margin of extra data surface at the outer
edge.
Turning this feature ON allows rewritable media to be burned out to the full capacity, using the
otherwise reserved areas of the media for data storage.
It is recommended that this setting be left OFF unless it is absolutely necessary for your
masters to copy to your blank media, as only the reported normal capacity of the media
can be guaranteed. There may be variations in the total available capacity between
individual discs that can result in inconsistent burn success.
Remember, you must use the Shutdown menu or manually Save
the settings under the Utilities menu if you want any changes
you have made to remain after the Duplicator is shut down!