Filter
Top Products
EN-14
S-VIDEO
RS-232C
Y
G(Y)
Cb/Pb Cr/Pr VIDEO
DVI
B(Cb/Pb) R(Cr/Pr) H/HV V
S-VIDEO
RS-232C
Y
G(Y)
Cb/Pb Cr/Pr VIDEO
DVI
B(Cb/Pb) R(Cr/Pr) H/HV V
C
B
(P
B
)Y C
R
(P
R
)
B G R
B(Cb/Pb)
G(Y)
R(Cr/Pr)
C
B
(P
B
)Y C
R
(P
R
)
Cb/Pb
Y
Cr/Pr
Viewing video images
S-VIDEO
RS-232C
Cb/Pb Cr/Pr VIDEO
DVI
B(Cb/Pb) R(Cr/Pr) H/HV V
1
2
S-VIDEO
RS-232C
P
bCr/Pr VIDEO
DVI
b
/Pb) R(Cr/Pr) H/HV V
1
2
A. Connecting the projector to video equipment
Preparations:
• Make sure that the power of the projector and that of the video equipment are turned off.
1. Connect one end of a commercially available video cable
to the VIDEO terminal of the projector.
2. Connect the other end of the video cable to the video
output terminal of the video equipment.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal
may appear on the screen when you change the channel via any channel that is not being received. In such a
case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its
channel skip function (that is a function not to display channels that are not being received) enabled
Connecting to a DVD player
To connect this projector to video equipment that has component video output terminals, such as a DVD player,
use the COMPONENT terminals.
When the video equipment is equipped with the S-
video output terminal, make the connection as
follows.
1. Connect one end of a commercially available S-video
cable to the S-VIDEO terminal of the projector.
2. Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
• Also read the instruction manual of the equipment to be
connected.
• This projector does not have any built-in speaker. To
reproduce audio, connect audio equipment.
• Contact your dealer for details of connection.
• Images may not be projected correctly depending on the type of the DVD player you use.
•Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
To VIDEO terminal
Video cable
To video output terminal
Video player, or the like
To S-video terminal
S-video cable
To S-video output terminal
Video player, or the like
Component cable (Option)
DVD player
To audio output
terminal
Audio cable (Option)
To audio input
terminal
BNC-RCAconnector
(Option)
Cable with BNC connector (Option)
Select this connection when using long cable.