Mitsubishi Electronics HC2000 Projection Television User Manual


 
EN-33
ENGLISH
3-M6
226
100
430
143
77
200
364
185
307
135
65
15
43
22848
ø64
Asking for installation
To view images projected by the ceiling-
mounted projector from the front:
When the projector is installed on the ceiling, the
special ceiling mount bracket, which is separately
sold, is required. Be sure to ask a certified
installation specialist for installation of the
projector. Contact your dealer for details.
Mitsubishi assumes no responsibilities for any
damage caused by use of other manufacturer’s
ceiling bracket and by inadequate installation
conditions even within the warranty period.
•When installing the projector on the ceiling, set
MIRROR in the INSTALLATION menu to
CEILING FRONT. See Page 25 for details.
Ask your installation specialist to provide a
breaker. When you do not use the projector, be
sure to shut down the main power by the breaker.
When the projector is installed on the ceiling,
projected images may appear darker than those
projected when the projector is installed on the
floor. This symptom is not a malfunction.
Do not install the projector where the exhaust
vents are exposed to air emitted by an air
conditioning. Such installation may cause a
breakdown.
Do not install the projector near a fire alarm
because it emits hot air from its exhaust vents.
To view images projected on the translucent
screen from behind:
Be sure to ask a certified installation specialist for
installation of the projector. Contact your dealer for
details.
•To view images projected from behind the screen,
set MIRROR in the INSTALLATION menu to
FLOOR REAR. See Page 25 for details.
Dimension Drawings (unit : mm)