Filter
Top Products
EN-17
ENGLISH
AUTO
MENU
D
V
I-
D
C
O
M
P
B
N
C
Z
O
O
M
M
E
M
3
S
-
V
id
e
o
OFF
Video
DVI-A
16:9
MEM2
ENTER
FOCUS–/LEFT FOCUS+/RIGHT
ZOOM IN/UP
ZOOM OUT/DOWN
LIGHT
S
ta
n
d
a
rd
M
E
M
1
C
O
N
T
B
R
IG
H
T
C
.T
E
M
P
T
I
N
T
C
O
L
O
R
S
H
A
R
P
LAMP
AC IN MAIN
TEMP POWER
ON
STANDBY
INSTALLATION
TEST PATTERN
SIGNAL SETTING
COMPONENT
FLOOR FRONT
STANDARD
0
ENGLISH
AUTO
ASPECT
MIRROR
KEYSTONE
LANGUAGE
EXPAND
opt.
KEYSTONE
H.KEYSTONE 0
0
V.KETSTONE
To stop projecting:
9. Press the POWER button on the projector or the OFF button on
the remote control.
•A confirmation message is displayed.
•To cancel the procedure, leave the projector for a while or
press the MENU button on the remote control or the MENU/
EXIT button on the projector.
10.Press the POWER button on the projector or the OFF button on
the remote control again.
• The lamp goes out and the projector goes into a standby
mode. In this standby mode, the POWER indicator blinks
red.
11.Wait about two minutes for the POWER indicator to be lit in red
steadily.
•During this period of two minutes in the standby mode, the
intake fan and exhaust fan rotate to cool the lamp.
• Do not turn off the main power switch while the POWER
indicator is blinking. Turning off the main power switch
immediately after use may cause a breakdown.
• Though the fan makes loud sounds during cooling, such
symptom is not a malfunction.
12.Turn the main power switch to off (or to the O position).
• For safety reasons, when you are not going to use the
projector for a long time, unplug it from the outlet.
• Cover the lens with the lens cap to protect it from dust.
When projected images are distorted to a trapezoid:
Adjust the setting values of KEYSTONE in the INSTALLATION menu.
(See Page 23 for menu setting.)
1. Display the INSTALLATION menu.
2. Select KEYSTONE by pressing the { or } button.
3. Press the ENTER button.
• The KEYSTONE menu appears.
4. Select V.KEYSTONE or H.KEYSTONE by pressing the { or } button.
5. Equalize the widths at the top and bottom of the screen (or heights at the left
and right of the screen) by pressing the $ or % button, viewing the screen.
To cancel the menu:
6. Press the MENU button several times.
POWER button/
POWER indicator
Main power switch
OFF button