Filter
Top Products
EN-23
ENGLISH
How to set the menus:
Following describe how to set Vertical Location as
an example.
1. Press the MENU button.
The top menu appears.
• When no signal is input, the top menu does
not appear.
2. Press the { or } button to select a menu to use.
3. Press the ENTER button.
The item at the top is selected.
4. Press the { or } button to select an item to
adjust.
•To set items marked with , press the $ or
% button.
5. Press the ENTER button.
• The submenu appears.
PICTURE
CONTRAST
BRIGHTNESS
COLOR
0
0
0
0
0
0
TINT
SHARPNESS
WHITE ENHANCE
opt.
PRO PICTURE
COLOR TEMP.
GAMMA
SET UP
OFF
OFF
THEATER1
BLACK STRETSCH
DISPLAY POSITION
opt.
PRO PICTURE
COLOR TEMP.
GAMMA
SET UP
OFF
OFF
THEATER1
BLACK STRETSCH
DISPLAY POSITION
opt.
PRO PICTURE
COLOR TEMP.
GAMMA
SET UP
OFF
OFF
THEATER1
BLACK STRETSCH
DISPLAY POSITION
opt.
SHUTTER
0SHUTTER RIGHT
SHUTTER LOWER
SHUTTER UPPER
0
0VERTICAL LOCATION
0
SHUTTER LEFT
00
0
SHUTTER
0SHUTTER RIGHT
SHUTTER LOWER
SHUTTER UPPER
0
0VERTICAL LOCATION
0
SHUTTER LEFT
00
0
SHUTTER
0SHUTTER RIGHT
SHUTTER LOWER
SHUTTER UPPER
0
-50VERTICAL LOCATION
0
SHUTTER LEFT
00
0
6. Press the { or } button to select an item to
adjust.
7. Set the selected item by pressing the $ or %
button.
To cancel the menu:
8. Press the MENU/EXIT button on the projector or
the MENU button on the remote control several
times.