Mitsubishi Electronics HC2000 Projection Television User Manual


 
EN-37
ENGLISH
Type of connectable signals
1
69
5
1724
16 9
8
1
C3C4
C5
C2
C1
17
24
9
8
116
Input signal
Screen size
Signal
representation
Resolution Horizontal sync
frequency (kHz)
Vertical sync
frequency (Hz)
Real display
(H x V)
*1 ) Analog input only
Important:
The maximum resolution supported by this projector is 1280x720. Signals having a higher resolution than
this are not projected with their original resolution.
In the case of a signal having a resolution and sync frequency other than those described in the table above, it
may be projected correctly by changing the resolution and frequency of the connected computer.
The component input terminals of this projector do not support RGB signals.
Nonconforming signals may not projected correctly.
Though it takes some time for an image to appear after a signal is input, such symptom is not a malfunction.
This projector does not support 3-line signals (Sync-on-green signals).
VGA 640 x 480 60 31.5 640 x 480
VGA 640 x 480 72 37.9 640 x 480
VGA 640 x 480 75 37.5 640 x 480
VGA 640 x 480 85 43.3 640 x 480
VGA 720 x 400 70 31.5 720 x 400
VGA 720 x 400 85 37.9 720 x 400
SVGA 800 x 600 56 35.2 800 x 600
SVGA 800 x 600 60 37.9 800 x 600
SVGA 800 x 600 72 48.1 800 x 600
SVGA 800 x 600 75 46.9 800 x 600
SVGA 800 x 600 85 53.7 800 x 600
XGA 1024 x 768 60 48.4 1024 x 720
XGA 1024 x 768 70 56.5 1024 x 720
XGA 1024 x 768 75 60.0 1024 x 720
XGA 1024 x 768 85 68.7 1024 x 720 *1
SXGA 1280 x 1024 60 64.0 1280 x 720 *1
SXGA 1280 x 1024 75 80.0 1280 x 720 *1
SXGA 1280 x 1024 85 91.1 1280 x 720 *1
UXGA 1600 x 1200 60 75.0 1280 x 720 *1
Connectors
RS-232C terminal
(D-SUB 9P)
PIN No. NAME I/O
1--
2 RXD IN
3 TXD OUT
4--
5 GND -
6--
7--
8--
9--
DVI terminal
(DVI-D)
PIN NO.
STATUS
PIN NO.
STATUS
1 DATA 2- 13 -
2 DATA 2+ 14 +5V Power
3
DATA 2 Shield
15 GND
4-16 Hot Plug Detect
5-17DATA 0-
6 DDC Clock 18 DATA 0+
7 DDC Data 19
DATA 0 Shield
8-
2
0 DATA 5-
9 DATA 1- 21 DATA 5+
10 DATA 1+ 22 Clock Shield
11
DATA 1 Shield
23 Clock+
12 - 24 Clock-
DVI terminal
(DVI-A)
PIN NO.
STATUS
C1 ANALOG RED
C2 ANALOG GREEN
C3
ANALOG BLUE
C4 H Sync
C5 GND
6 DDC Clock
7DDC Data
8 Analog Sync
14 +5V Power
15 GND
16 Hot Plug Detect