Filter
Top Products
Chapter 1. Television Overview 15
TV Indicators
POWER/TIMER Indicator
LED Color TV Condition Additional Information
None
TV is powered off.
Normal operation.
Blue
TV is powered on.
Normal operation.
Blue
1. TV just plugged into AC outlet.
Wait until blinking stops before turning on (approximately 1
minute). Normal operation.
2. AC just restored after power
failure.
3. TV Rebooting after System
Reset used.
4. TV Rebooting after power
fluctuation or receiving abnor
-
mal digital signals from digital
channel, CableCARD™, or
digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
For detailed information, see the instructions that accompany the
authorized software update. Important: Do not use unauthorized
software at any time.
Blue
TV powered off and auto-on timer
is set.
Normal operation. TV can be turned on at any time.
STATUS Indicator
LED Color TV Condition Additional Information
None
Normal TV on or standby condition.
Normal operation.
Red
TV may require service. Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in.
If the LED is still on, contact your dealer or a Mitsubishi Authorized
Service Center. See www.mitsubishi-tv.com or call 1-800-332-
2119 to receive Authorized Service Center information.
Off Steady On Slow Blinking Fast Blinking