Mitsubishi Electronics WD-52628 Projection Television User Manual


 
Appendices 101
Audio Inputs: Qty. 7 pairs RCA Pin Plug 500 mV (full scale), 43-k ohm
Outputs
Video, Qty. 1
Signal Type
Video: RCA Pin Plug 1.0 Vp-p, 75-ohm
NTSC 480i only
Audio:, Qty. 2 pairs RCA Pin Plug, 500 mV rms
+
200 mV (full scale) for analog sources, 1.5
Vrms
+
0.5 Vrms (full scale) for digital sources.
Digital Interfaces:
Digital Audio Output, Qty. 1 RCA Pin Plug, Signal Type, Dolby Digital, PCM
IEEE 1394, Qty. 3
(1 front, 2 rear)
IEEE 1394 Four Pin type Terminal, S400
Audio/Speakers
Qty. 2 woofers 5.5" x 2.2"; Qty. 2 Tweeters 1.5" round
Dimensions: WD-52628 34" H x 49.6 " W x 18.6 " D, 121 lbs.
WD-62628 40.5" H x 58.3" W x 19.9" D, 133 lbs.
WD-73727 44.8" H x 69.9" W x 21.5 " D, 188 lbs.
Power Consumption WD-52628 295 watts
WD-62628 295 watts
WD-73727 335 watts
NetCommand® IEEE 1394 System Compatibility:
This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of
development. This exciting new networking and control technology is designed to provide high-performance
digital connections and product control, making the product easier to use.
Mitsubishi D-VHS VCRs are fully compatible with this TV in audio, video, and control.
As other manufacturers distribute products that use the IEEE 1394 AV/C standards, they will be responsible
for developing products that meet the standards of the technology, as well as compatibility testing
with other products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise
compatibility with these other products. Any compatibility problems with other manufacturers products
should be brought to the attention of those manufacturers.
The HDMI input is compliant with EIA-861B standards for standard, extended and high definition video,
digital audio and HDCP copy protection. HDMI input 1, however, is not intended for use with personal
computers or devices outputting video signals with computer resolutions.
Appendix A: Specifications, continued