Filter
Top Products
86 Chapter 6. Additional Features
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control, (within seconds of each press), the PIP/POP
cycles through the following display options:
MAIN
PICTURE
Side-by-Side
Side-by-side
pictures
(Not available
when PC is
source)
MAIN
PICTURE
POP 1
POP 2
POP 3
3 POP
(Not available
when PC is
source)
PIP Ant-1 17
Ant-12 XXXX
Standard
Stereo SAP
TV-PGDLSV
SQV1
PIP
PIP
(PC as main
picture only)
Ant-12 XXXX
Standard
StereoSAP
TV-PGDLSV
SQV1
PIP off
To turn PIP/POP off, wait at least 10 seconds and then
press PIP/POP. The next time you activate PIP/POP, the
last-used PIP/POP option will be displayed.
Changing PIP/POP Device
When PIP is displayed, press PIP DEVICE to change the
PIP picture source device. A menu similar to the Device
Selection menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on ANT-1 and ANT-2.
Operation of PIP and POP
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only be
shown as the main picture. PC images can only be the
main picture. If you press EXCH while viewing images
from a PC, the TV exchanges audio with the PIP but
leaves the main image in place.
Moving a PIP Image
If no menus are on screen, press ADJUST , , , or
to move the PIP display anywhere on the main screen.
When the main picture is from a PC, the PIP can be
moved through four designated positions.
Automatic POP Switching
When automatic POP switching is active, the TV cycles
through memorized analog channels on Ant-1 or Ant-2 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic POP
switching.
Selecting POP “Live” Image
Press ADJUST to select a different POP “live”
image (automatic POP switching must be paused.)
Freezing the PIP and Side-by-Side
Pictures
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a “live” image.
You can display programs from analog channels, analog inputs, or analog devices as picture-in-picture (PIP) and
picture-outside-picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on
ANT-1 and displays them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture
but cannot be the sub-picture. PC screens can be viewed as the main picture with PIP.
IMPORTANT
• The side-by-side option cannot show the
same channel or device on both sides.
• If ANT-1 or ANT-2 is the main picture,
ANT-2 is not available as a PIP, POP, or
side-by-side image.
• PIP/POP is not compatible with signals
from memory cards.
• You can view only one HDMI input at a
time with the PIP/POP or side-by-side
feature.