Mitsubishi Electronics WD-57733 Flat Panel Television User Manual


 
5. TV Menu Settings 39
Setup Menu Options
Language
English
Spanish
Display on-screen menus in either English or Spanish.
Note: To listen to audio in other languages (when available), see the section
on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
signal) or Language (digital signal).
Scan
Ant-1 Air
Ant-1 Cable
Ant-2 Air
Ant-2 Cable
Scan memorizes broadcast channels to make them easier to find. To start
channel memorization:
1.
Highlight one of the input selections based on your connection to
ANT 1
or
ANT 2
:
Air when connected to an indoor or outdoor antenna.
Cable when connected to direct cable (no cable box)
2. Press to highlight START.
3. Press
ENTER
to start channel memorization for the selected input.
Notes on Scan and channel memorization:
Channel memorization may take up to 15 minutes to complete.
To stop channel memorization before completion, press
CANCEL
.
When watching TV, press
CH
to move through memorized channels.
To add a digital channel that does not appear in the Edit menu without repeating channel memorization:
1. Look up the physical channel number for the new digital channel. www.antennaweb.org can help you
find the physical channel number.
2. Tune to any channel on the
ANT 1
or
ANT 2
input your antenna is connected to.
3. Use the number keys and
CANCEL
to enter the physical channel number followed by “-1” and
ENTER
. For
example, for physical channel 36, press
3
6
CANCEL
1
ENTER
.
The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:
a. Add the channel to memory.
b. Change the channel number to the virtual channel number sent by the broadcaster.
c. Add to memory any associated sub-channels.
Setup Menu
Setup menu, Scan option
Use the Setup menu to:
Select English or Spanish for menus and on-screen
text.
Scan the channels available for the antenna or cable
service connected to th
e
ANT 1
or
ANT 2
jacks.
Edit channel options, including channel locking.
Set the TV’s internal clock.
Set the TV Timer to turn on the TV automatically at
a designated time.
Set the energy mode for power consumption when
the TV is powered off.