Filter
Top Products
52 6. NetCommand
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Guide Displaying the Disc Menu (DVD or high-defini-
tion disc format)
“Learn” the
DISC MENU
,
TOP MENU,
or other key as
named on the original remote in the Guide
learning position.
While watching the device, press
GUIDE
to display
the disc menu.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. “Learn” the
GUIDE
key on the original remote in
the Guide learning position.
2. Learn the
PAGE
and
PAGE
keys of the
original remote in the Page Up and Page Dn
learning positions.
1. While watching the device, press
GUIDE
to
display the guide.
2. Press
CH/PAGE
/ to send the Page Up/Dn
commands for the guide.
Page Up
Page Dn
Using Page Up/Down
If the device’s original remote control has separate
keys for Channel Up/Dn and Page Up/Dn, the
TV remote control’s
CH/PAGE
/ key can work
like the two separate keys.
1. “Learn”
CHANNEL
/ in the Channel Up/Dn
positions.
2. “Learn”
PAGE
/ in the Page Up/Dn posi-
tions.
Inside the Guide
Press
CH/PAGE
/ to send the Page Up/Dn com-
mands.
Outside the Guide
Press
CH/PAGE
/ to send the Channel Up/Dn
signal.
Enter Enter Functions (cable boxes, satellite receivers, etc)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT
or
OK
. A second key is for use with number keys for direct channel selection. NetCommand uses
the same
ENTER
key for both operations.
When
ENTER
has a menu or guide function or when
the original remote control uses the same key for
menus and channel selection:
Learn the
ENTER
,
SELECT,
or
OK
key in the
NetCommand Enter learning position.
1. Press
MENU
or
GUIDE
to display the device’s menu
or guide.
2. Press
ENTER
within the menu and NetCommand
will send the Enter signal for menus.
Enter (digits)
When
ENTER
is for channel changes, i.e., the original
remote control has a separate
ENTER
key for this
function):
Learn the
ENTER
key for channel selection in the
NetCommand Enter (digits) learning position.
Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Press digit key(s) and then press
ENTER
.
NetCommand will send the Enter signal for
channel selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the Cancel or Exit function in the
NetCommand Cancel learning position
1. Press
MENU
or
GUIDE
to display the menu or guide.
2. Press
—
CANCEL
and NetCommand will send the
Cancel or Exit signal.
— (separa-
tor)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-
channel digits, e.g., digital channel 12-1 (main
channel is 12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand – (separator) learning position.
Press digit key(s) and press
—
CANCEL
. NetCommand
will send the channel-separator signal.
Operating NetCommand-Controlled Devices, continued