Filter
Top Products
Appendices 71
Appendix E: Troubleshooting
Reset Name When to Use How to Use Resulting Action
Format When the picture shape
seems incorrect, use
FORMAT
to change the
shape of the picture.
Press the
FORMAT
key to cycle through the
available formats to find the best format
for the current picture.
The last-used format for a signal
type is memorized for each input.
The next time the same input and
the same signal type is viewed, the
last-used format will be recalled.
PerfectColor™
and PerfecTint™
Reset
(for the single
input currently
being watched)
When the color intensities
seem out of balance,
use the PerfectColor/
PerfecTint reset to reset
the color balances to the
original factory settings.
Both PerfectColor and
PerfecTint and are reset
at the same time.
1. While viewing the input to be reset,
press
MENU
to display the Main
menu with the A/V icon highlighted.
2. Use to highlight PerfectColor
and press
ENTER
to display the
PerfectColor adjustment screen.
3. Press
CANCEL
to reset the colors.
All PerfectColor/PerfecTint sliders
are reset to the original center
position. The PefectColor/PerfecTint
settings for other inputs remain
unchanged.
Note: PerfecTint sliders are avail-
able only on 734 series models.
A/V Memory
Reset
(for the single
input currently
being watched)
When audio and/or video
settings for a single input
seem incorrect, use A/V
Memory Reset to return
the input to the original
factory settings.
1. While viewing the input to be reset,
press
MENU
to display the Main
menu with the A/V icon highlighted.
2. Use to highlight the Reset icon
and press
ENTER
to reset.
All Audio and Video settings for the
individual input are reset except
for the Listen To, Language, audio
Balance, and Closed Caption
settings.
A/V Reset
(for all inputs)
To reset audio and video
adjustments for all inputs
to the original factory
settings.
While viewing the TV, press the front
panel buttons
GUIDE
and
FORMAT
at the
same time.
All Audio and Video settings are
returned to the original factory
settings, including Listen To and
Language, plus Closed Captions
settings and Format settings .
Channel
Memorization
To erase and re-
memorize channels on
ANT 1
or
ANT 2
.
1. While viewing the TV, press
MENU
to
display the Main menu.
2. Press to highlight the Setup icon.
3. Press to highlight the Scan icon.
4. Press to highlight the antenna
input and reception mode, e.g. Ant
1 Air.
5. Press to highlight the Start
button icon and press
ENTER
to start
the memorization.
All previously memorized chan-
nels for the selected antenna
input are erased and a new set of
memorized channels is created.
All custom settings for FAV,
channel names, and channel
locks are deleted. To add or
delete individual channels, see
Edit menu instructions in chapter
5, “TV Menu Settings.”
Lock Menu Pass
Code
To change your Lock
menu pass code
See the
cutout page in Appendix B.
Allows a new code to be
established.
TV Reset Comparison Guide
You can resolve many common TV problems using the
reset functions described in the following table. See
also the additional troubleshooting suggestions later in
this appendix.
IMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from
ANT 1
,
ANT 2
, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.