Mitsubishi Electronics WD-57833 Projection Television User Manual


 
5. TV Menu Settings 49
Inputs Menu Options
Name
Cable Box,
Camcorder,
DVD, DVD2,
DVR, Game, HD
Disc, Satellite,
VCR, PC
On/Off (
ANT 1
and
2
only)
Off (HDMIonly)
• AssignorchangenamesofinputsappearingintheInput Selection
menu.
• TurnAnt-1andAnt-2 OnorOff.
• TurnunusedHDMIinputsOff.
• Press tomovebetweeninputs.
• Press toselectaname.
• IfyouchangethenameofaninputafterperformingNetCommand
“learning,”theIRcodesyou“learned”areerased.
Note:
WhenyoudisconnectanHDMIdevice,theiconremainsintheInput
Selectionmenuuntilyouremoveit.ToremoveanunwantedHDMIicon,
selectOfffortheHDMIinput.
Order
PutfrequentlyusediconsatthestartoftheInput Selectionmenu.
1. Press
tohighlighttheicontomove.
2. Press
ENTER
toconfirmtheselection.
3. Press todragtheicontothedesiredposition.
4. Press
ENTER
tosetthenewposition.
Learn
• Performinitialset-upofNetCommandcontrolofadevice.
• AddorremoveindividualkeysfromNetCommandcontrolofadevice.
Seedetailedinstructionsinchapter6,“NetCommand.”
AVR
SetupNetCommandcontrolofanA/Vreceiver.Thisset-upallowsyouto:
• OperatetheA/Vreceiver’spowerandvolumefunctionswiththeTV’sremotecontrol.
• MaketheA/Vreceiverswitchautomaticallytothecorrectaudioinputwhenyouselecta
deviceintheTV’sInput Selectionmenu.
Seedetailedinstructionsinchapter6,“NetCommand.”
Guide
Guide On/Off
SeeinstructionsonthefollowingpagefortheTVGuide
OnScreensystem.
Devices Ant-1, Ant-2
Zip Code [5-digitZIPcode]
Inputs Menu
Change input names using the Inputs > Name menu.
Note:
WhenyouchangeaninputnameintheNamemenu
andthenexittheNamemenu:
Thenameischanged
TheiconintheInput Selectionmenuischanged
Audioandvideosettingsarechangedtothe
defaultsforthenewdevicetype.
AllNetCommand“learning”fortheinputisalso
erased.