Mitsubishi Electronics WD-57833 Projection Television User Manual


  Open as PDF
of 96
 
54
6
NetCommand
About NetCommand
• NetCommandsetupisoptional.
• YoucanperformNetCommandsetupwhentheTV
firstrecognizesadeviceduringAutoInputSensing
oratanyconvenienttimeafterward.
• NetCommandoperatesbysendingremotecontrol
signalsfromtheTVtoyourotherdevicesviatheIR
emitters,tellingthedevicestoplay,record,change
inputs,adjustvolume,changechannels,orperform
otherfunctions.Allthisisaccomplishedwiththe
TV’sremotecontrolandtheslideswitchleftinthe
TV
position.
• TheIR“Learning”featureofNetCommandallows
theTVtodeterminetheIRcontrolsignalsforyour
A/Vdevices.
• NetCommand
®
cancontrolIEEE1394devicesby
sendingcontrolsignalsoveraFireWire
®
cable.
• YoucanchoosethelevelofNetCommandcontrol
foryourhometheater.
Standard Setup. Performastandardsetupif
you:
WantNetCommandtocontrolonlyafew
devices,suchastheTV,aplaybackdevice
(likeaDVDplayer),andacablebox.With
thissetup,youcanusetheTV’sremote
controltooperatethesedevices.
WanttheeaseandflexibilityofNetCom-
mand-controlledrecording,withseamless
setupoftime-delayedorimmediaterecord-
ingsamongnetworkeddevices.
WanttouseTVGuideOnScreentocontrol
yourVCRorA/Vdisc.Afterperformingthis
setup,youcanusetheTV’sremotecontrol
tooperatethesedevices.
A/V Receiver Setup. PerformA/Vreceiver
setupifyouwantNetCommandto:
ControlasurroundsoundA/Vreceiver.
Automaticallychangeaudioinputselections
onanA/Vreceiverwhenyouchangeinputs
ontheTV.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
Netcommand can control your devices. See the
explanation on the following page.
 previous next