Mitsubishi Electronics WD-57833 Projection Television User Manual


  Open as PDF
of 96
 
6. NetCommand 65
NetCommand-Controlled Recording, continued
Time-Delayed Recording from ChannelView
Set Up the Recording
1. EnsurethatTVEnergyModeissettoFast Power
OnandtheTVclockissettothecorrecttimeand
day.See“SetupMenu”inchapter5,“TVMenu
Settings.”
2. Press
GUIDE
toviewChannelViewlistingsforthe
currentinput.
3 Press tohighlightthesourcechannelfrom
whichyouwishtorecord.
4. Press toviewalistoffutureprogramsonthat
channel.
5. Press tohighlightafutureprogram.
6. Press (
RECORD
).Ared“R”temporarilydisplays
nexttotheprogramlistingtoindicatetheprogram
willberecorded.
A red “R”
appears briefly
in ChannelView
to indicate
a scheduled
recording.
7. ReviewtheRecordListtoconfirmthattherecord-
ingisnowintheschedule.ToviewtheRecordList:
a. Press
MENU
todisplaytheRecordmenu.
More on VCR Recording
Setting Up Analog VCR Recordings with TV Guide
On Screen
WhensettinguparecordingusingTVGuideOn
Screen,notethat:
• Youmustselectthedesiredrecordingdevicein
theTVGuideOnScreenRecord Optionsmenu.
Ifyouhavebothanaloganddigitalrecording
devices,alwaysverifythattheanalogdeviceis
theTVGuideOnScreendefaultdevicebefore
startingananalogrecordingwiththe
(
RECORD
)
key.
• Thedestinationrecordingdeviceforanalog
recordingsmustbetheanalogdeviceconnected
totheTV’s
RECORD OUTPUT
jacks.
Restrictions for Traditional VCRs
with NetCommand- and TV Guide On
Screen-Controlled Recording
• YourVCRmustbeconnecteddirectlytothe
RECORD OUTPUT
audioandvideooutputs.
• Ifthesourcedeviceorrecordingdevicedoesnot
haveseparatepoweronandoffcontrols,then
leavethedevicepoweredon.
Direct VCR Recording from an Antenna or Cable
Source
YoucanusethismethodwhentheVCRisconnected
toreceiveprogrammingfromacablebox,direct
cable,orover-the-airantenna.WhenyourVCRisthe
currentdeviceandtheTVremotecontrol’s (
RECORD
)
keyhasbeen“learned”fortheVCR,theTV’sremote
worksthesameastherecordbuttonontheVCR.
1. Press
INPUT
ontheTV’sremotetodisplaythe
Input Selectionmenu.Highlightthetraditional
VCRandpress
POWER
toturnontheVCR.
2. Press
ENTER
toswitchtheTVtotheVCR.
3. ChangetheVCR’stunertothechannelyouwish
torecord.
4. Press
(
RECORD
)t
ostartrecording.Youwillneed
tostoptherecordingmanuallyattheendofthe
program.
Recording from ChannelView
™
ChannelView
™
isavailablewhenTVGuideOnScreen
isdisabled.ChannelViewprovidesprogramlistings,as
sentbythebroadcasters,formemorizedchannelson
ANT 1
and
ANT 2
.Pressthe
GUIDE
keywhilewatching
ANT 1
or
ANT 2
toseeChannelViewlistingsandtoset
upimmediateorfuturerecordingsasdescribedhere.
Immediate Recording from ChannelView
1. SwitchtheTVtotheprogramsourcebyusingthe
Input Selectionmenu.
a. PressINPUTtodisplaytheInput Selection
menu.
b. Highlighttheiconfortheantennaandpress
ENTER
toswitchtotheprogramsource.
2. Press
GUIDE
toviewChannelViewlistingsforthe
currentinput.
3. Use tohighlightthechannelandprogramyou
wishtorecord.
4. Press (
RECORD
).TheTVwilltunetothechannelif
needed.
Ared“R”brieflyappearsnexttotheprogramlisting
toindicatetheprogramwillberecorded.
5. Press
EXIT
toreturntoTVviewing.
b. HighlightListtodisplaytheRecordList.
8. Press
MENU
toreturntothetoprowoficonsorpress
EXIT
toreturntoTVviewing.
 previous next