Filter
Top Products
10
External Speaker Connections
External speakers may be connected to the PlasmaSync
4210W to reproduce sound from VIDEO, DVD or RGB
signal sources.
External speakers may be connected directly to the SPEAK-
ERS terminals or indirectly by connecting a stereo system
amplifier to the audio outputs.
CAUTION:
Unplug the PlasmaSync 4210W and all
connected components before connecting external
speakers. Use only speakers with 6-ohm impedance and
a power output rating of 7 watts or more.
To connect external speakers directly to the PlasmaSync
4210W:
1. Strip the ends of the speaker wires.
2. Press down the tabs below the SPEAKERS terminals,
insert the speaker wire and release the tab to secure the
speaker wire connection:
[a] Connect the right speaker (located at right side
of the monitor when viewed from the front)
positive (+) wire to RIGHT +.
[b] Connect the right speaker negative (–) wire to
RIGHT -.
[c] Connect the left speaker negative (–) wire to
LEFT–.
[d] Connect the left speaker positive wire (+) to
LEFT+.
– +
AUDIO
VIDEO
IN
L
R
MONO
DVD/HD
IN
L
R
RGB
IN
L
R
MONO
AUDIO
OUT
(VARIABLE)
L
R
REMOTE
CONTROL
EXT SPEAKER R
+ –
– +
EXT SPEAKER L
+ –
VIDEO
VIDEO IN
Y/Y
C
B
/P
B
C
R
/P
R
RGB IN
S-VIDEO IN
EXTERNAL
CONTROL
DVD/HD
RGB