Filter
Top Products
34
Resetting to the default values
Use these operations to restore all the picture adjustments,
audio settings, wide adjustments, RGB adjustments, OSM
adjustments, etc., to the factory default values.
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the “OK” button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “RESET”, then press
the “OK” button.
The “RESET” screen appears.
3. Use the ▲ and ▼ buttons to select “RESET”, then press
the “OK” button.
RESET
RESET
RETURN
SEL.
OK
EXIT
OK
MENU
All the settings are restored to the default values.
4. Once the setting is completed ...
Press the “MENU” button.
The menu disappears.
FUNCTION
POWER MGT
RGB SELECT
HD SELECT
OSM
GRAY LEVEL
PLE
RESET
RETURN
:
:
:
:
:
:
OFF
RGB
1080I
ON
3
AUTO
SEL.
ADJ.
EXIT
MENU
Setting the brightness level to the minimum
Locking this mode allows you to dim the picture.
Example: Setting the “PLE” to “LOCK”
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the “OK” button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “PLE”.
3. To set the PLE to "LOCK" ...
Use the ᮤ and ᮣ buttons to select “LOCK”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
AUTO ↔ LOCK
4. Once the setting is completed ...
Press the “MENU” button.
All menus disappear.
Information
Ⅵ PLE
AUTO ............Normally set to AUTO.
LOCK ............Sets the brightness level to the mini-
mum.
FUNCTION
POWER MGT
RGB SELECT
HD SELECT
OSM
GRAY LEVEL
PLE
RESET
RETURN
:
:
:
:
:
:
OFF
RGB
1080I
ON
3
AUTO
SEL.
ADJ.
EXIT
MENU
FUNCTION
POWER MGT
RGB SELECT
HD SELECT
OSM
GRAY LEVEL
PLE
RESET
RETURN
:
:
:
:
:
:
OFF
RGB
1080I
ON
3
LOCK
SEL.
ADJ.
EXIT
MENU