29
Function Settings Menu
Setting the power management for computer images
This energy-saving (power management) function auto-
matically reduces the monitor’s power consumption if no
operation is performed for a certain amount of time.
Example: Turning the power management function on
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the “OK” button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “POWER MGT”.
Information
Ⅵ Power management function
* The power management function automatically re-
duces the monitor’s power consumption if the
computer’s keyboard or mouse is not operated for a
certain amount of time. This function can be used
when using the monitor with a computer conforming
to the VESA DPMS format.
* If the computer’s power is not turned on or if the com-
puter and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer’s power man-
agement function, refer to the computer’s operating
instructions.
Ⅵ Power management settings
ON............In this mode the power management func-
tion is turned on.
OFF ..........In this mode the power management func-
tion is turned off.
Ⅵ Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See page 30 for in-
dicator status and discription.
3. To turn the power management function on ...
Use the ᮤ and ᮣ buttons to select “ON”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
ON ↔ OFF
FUNCTION
POWER MGT
RGB SELECT
HD SELECT
OSM
GRAY LEVEL
PLE
RESET
RETURN
:
:
:
:
:
:
ON
RGB
1080I
ON
3
AUTO
SEL.
ADJ.
EXIT
MENU
4. Once the setting is completed ...
Press the “MENU” button.
The power management function is turned on, and the
menu disappears.
FUNCTION
POWER MGT
RGB SELECT
HD SELECT
OSM
GRAY LEVEL
PLE
RESET
RETURN
:
:
:
:
:
:
OFF
RGB
1080I
ON
3
AUTO
SEL.
ADJ.
EXIT
MENU