Filter
Top Products
GB 26
Control folder ☛ System info
If you need to contact your service provider or a service centre, they may ask for
information that is available from this menu.
This gives general information about the hardware and software version on which
your Mediamaster is running.
Timer set-up
•First, select Channel List using the cursor left /cursor right button.
• Then, choose Channel to select the desired TV/Radio channel.
• Enter the date using the numerical buttons (yy/mm/dd).
• If you enter an incorrect digit, you can erase it using cursor left.
• Set the start and stop times using the numerical buttons.
The different start times can never overlap. If you try to enter a start or stop time
within a period of time that is already occupied, you will receive a warning mes-
sage.
•Press select to save the timer details or back to cancel.
•Press back twice to exit the Navi Bars and return to viewing mode.
•Press
to return the Mediamaster to standby mode.
Up to eight different timer events can be predefined. The events will be sorted in
order of their start times.
You can erase a predefined event by pressing cursor right.
•Press back to cancel the deletion and select to delete the event.
Control folder ☛ Timer
General
You can program the Mediamaster to switch on and off at predefined times.
The timer function is very useful when you want to record a programme and you
are unable to start/stop the recording event yourself, or when you just want to be
reminded of the start of a programme that you do not want to miss.
Note! The timer function only works when the receiver is in standby mode.
Navi Bars