Filter
Top Products
GB 27
Settings folder ☛ TV
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
You can adjust the audio/video settings for your receiver.
•Press opt to view the TV picture on the screen.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide-screen TV.
Position of the RGB output
Adjust the horizontal position of the TV picture using the cursor left/cursor right
button.
Set transparency level
Adjust the transparency level of the graphics in the menus using the cursor left/
cursor right button.
Select digital audio format
Select an audio format for digital output (the upper audio output on the rear of the
Mediamaster). Select AC-3 when the sound is transmitted in Dolby™ Digital for-
mat. Select PCM for ordinary digital sound. Please note: when you select AC-3,
there willnot be any sound output from the analogue audio connections.
Settings folder ☛ Channel
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The procedure is performed in the same way as during the First- Time Installation.
Please refer to page 19.
Update channels via a PC
On the Nokia web site (www.nokia.com) you can download a Windows™ software
for updating the channel lists via the serial port. The serial port connector can be
found on the back of the Mediamaster (see page 10) .
Settings folder ☛ Antenna
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The procedure is performed in the same way as during the First- Time Installation.
Please refer to page 15.
Navi Bars