Filter
Top Products
GB 3
Connecting a TV and a VCR
Quick guide
Preparing the
Remote Control
See pages 13 and 14 if you want to connect to an analogue
satellite receiver or connect in any other way.
•Plug in your Mediamaster.
• The ”First time installation” menu is shown.
•Press the select button on the remote control to start the installation proce-
dure.
Switching on for the first time
Language
•Select the desired language from the menu using the cursor up/cursor down
buttons.
This will also become the main language for audio and subtitling.
•Press select to continue.
Antenna/satellite selection
This Quick guide describes connection to the most common satellite dish in-
stallations that have one (1) Universal LNB.
• Select the ”One antenna/one LNB configuration” alternative.
•Press select to continue.
If you have two or more LNBs connected to your satellite dish, see page 16.
Satellite dish
The satellite dish must have an unobstructed path to the satel-
lites.
Install the satellite dish according to the instructions.
If you already have a satellite dish installed, note that you will
need a Universal LNB which works on the frequencies 10.70-
12.75 GHz to be able to handle digital signals.
x
1
2
3
1
2
Antenna
RF
TV
Video
SCART
Satellite dish
SCART