Filter
Top Products
Chapter 2 • Getting Started
Getting Started
This section describes how to unpack and start working with
MGW 2400.
• To unpack and rack-mount MGW 2400, refer to page 10
• For a hardware overview, refer to page 12.
• For instructions on installing and removing encoding
modules and connect sources, refer to page 16.
• For instructions on initializing MGW 2400, refer to page
20.
• For instructions on configuring MGW 2400 for the
network, refer to page 28.
• For instructions on configuring MGW 2400's network
parameter settings if your network's DHCP is disabled, refer
to page 34.
• For instructions on sharing a SCSI disk's drive with the
network, refer to page 41.
• For instructions on configuring MGW 2400 by using
Telnet, refer to page 45.
9