Filter
Top Products
Chapter 2 • Initial Configuration
To enable Share access for SCSI disk partitions:
1. Log on to MGW 2400’s Configuration Utility as
Administrator; the Main menu appears.
2. Press 6 (Utility Menu); the Utility menu appears.
3. Press 3 (Enable Share Access to SCSI Disk Partitions)
and enter the desired partitions as illustrated in Figure 18;
the partitions you entered can be accessed from the
network.
Figure 18: Enable Share Access for SCSI Disk Partitions
4. To return to the Main menu, press 0 (Return to Main
Menu).
5. To log off MGW 2400, press 0 (Quit); the Logon prompt
appears.
6. To log on again, type the username and password for
Administrator; the Main menu appears.
7. If you don’t want to log on again, terminate the connection.
42