Filter
Top Products
Chapter 2 • Initial Configuration
MGW 2400 Utilities
This section instructs you how to set the time and date. It
explains how to manage a SCSI disk from MGW 2400’s
configuration and how to enable FTP mode for maintenance
purposes.
Setting Time and Date
MGW 2400 lets you set the time and date. To set the time and
date, do the following:
1. Log on to MGW 2400’s Configuration Utility as
Administrator; the Main menu appears.
2. Press 6 (Utility Menu); the Utility menu appears.
Figure 17: MGW 2400’s Utility Menu
3. Press 2 (Set Time and Date); the Set Time and Date menu
appears.
4. Press 1 (To Update Time and Date) and follow the on-
screen instructions; the time and date are updated.
39