Filter
Top Products
Chapter 2 • Initial Configuration
Changing Passwords
MGW 2400 lets you define and change passwords for
Administrator. To define and change passwords, do the
following:
1. Log on to MGW 2400’s Configuration Utility as
Administrator; the Main menu appears.
2. Type 4 (Change Administrator Password); the Password
menu appears.
3. To change Administrator's password, press 1 and follow
the on-screen instructions.
4. Make a note of your new password.
5. To return to MGW 2400’s Main menu, press 0 (Return to
Main Menu).
6. To log off MGW 2400, press 0 (Quit); the Logon prompt
appears.
7. To log on again, type the user name and password for
Administrator; the Main menu appears.
8. If you don’t want to log on again, terminate the connection.
Note
We strongly recommend that you make a note of your passwords. You can
use the table provided at page 103 for your convenience.
27