Filter
Top Products
Chapter 2 • Initial Configuration
Uploading Files
To replace or add files for maintenance purposes, MGW 2400
allows you to transfer files to the disk via FTP. To transfer files,
do the following:
1. Log on to MGW 2400’s Configuration Utility as
Administrator; the Main menu appears.
2. Press 6 (Utility Menu); the Utility menu appears.
3. On the Main menu, press 1 (FTP Mode); the FTP prompt
appears.
4. Follow the instructions provided by Optibase.
Note
The FTP option has been provided for maintenance procedures only. We
strongly recommend that you do not add, delete or replace any files on your
own as this will void your warranty and may cause MGW 2400 to fail.
44