Filter
Top Products
FAQs
3.3 EFFECTIVE DISTANCE OF THE
REMOTE CONTROL TRANSMITTER
3.2 Battery installation
Open the battery
compartment
cover.
Replace the battery
compartment cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions.)
NOTES:
*
When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
*
When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light shines on
the REMOTE SENSOR of the TV, the remote
operation may be unstable.
There is too much light in the room.
There is an obstacle in the path of the beam.
The batteries are weak or dead.
The batteries are inserted incorrectly.
Why is the remote not working properly?
The remote control is not aimed at the sensor.
Distance is too far away from the remote sensor
Install two "AAA"
batteries paying
attention to the
polarity diagram
in the battery
compartment.
2
3
1
!
30
0
30
0
5m