Filter
Top Products
STILL
VOL
VOL
-50~+50
NORMAL/WARM/COLD
ON/OFF
ON/OFF
OFF/LOW/HIGH/MILD
OFF/LOW/HIGH
ITEM
CONTRAST
BRIGHT
COLOUR
PEAKING
*TINT
MATRIX
CTI
*COMB
DNR
SVM
PRESSING
WEAKER
DARKER
PALER
LOWER
STRONGER
LIGHTER
DEEPER
HIGHER
9.1.3 Making use of DYNAMIC button
Press DYNAMIC button to switch the set between STATIC picture and
MOVING picture mode according to the type of the program you are watching. For
example, if you are watching programs in which characters are main and moving
and changing are less such as stock information, selecting STATIC is suggested.
If you are watching programs such as TV play or sports in which moving and
changing are more and quicker, selecting MOVING is suggested.
9.1.4 Making use of P.SCAN button
Press P.SCAN button to cycle through AUTO SCAN/100Hz/P.SCAN and
select the proper scan mode in which most satisfying picture can be displayed.
Note: In AUTO SCAN mode, the set can automatically set to 100Hz scanning
when the signal source is in PAL system. When the signal source is in NTSC
system, the set will automatically set to progressive scanning.
9.1.5 Making use of STILL button 9.1.6 Making use of PHOTO Button
Press STILL button
to still the current picture,
press it again to restore.
Press PHOTO button
to caption moving picture
into 4 successive frozen
frames. In a certain interval
a new series of "photo finish"
picture is displayed,
overwriting the old ones.
Press the button again to
cancel.
DYNAMIC
P.SCAN
PHOTO