!
3.1 Antenna Connection
!
3. Installation
To ensure a bright-coloured and clear picture use an outdoor antenna or
CATV cable.
Note:
In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm
adaptor (not supplied).
When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into
the 75 ohm aerial socket directly.
Note:
1. When you connect the outdoor antenna cable to the antenna terminal on the set, turn off the
power supply to the set first.
2. In thunder and lightning weather, disconnect the outdoor antenna to avoid lightning strike.
3. When receiving CATV programs, a cable box (not supplied) needs to be used.