Filter
Top Products
(3)
(2)
(1)
28
8.4 Using the PREVIEW button
8.3 Using the PREVIOUS channel button ( )
8.2 Using the CH or CH buttons
Press CH (1) to select higher position
numbers; CH (2) to select lower ones.
Press the button on the remote controller can swap the current viewed channel with the
previous one.
Note: Pressing the button can also switch between programs from RF, AV1, AV2, AV3,
DVD IN, HDTV IN (but this button can not be used to switch between YPbPr and XGA).
Press PREVIEW button to start scanning from the current channel to higher channel, 16 sub-
pictures will fill up the whole screen one by one. You can press one of P.SCAN, PHOTO,
DYNAMIC, STILL, 0-9, -/-- , buttons on the remote controller to select a corresponding channel
program.
These buttons' arrangement
is in accordance with the
arrangement of the program
menu, each button represents
the corresponding program.
The menu of 16 picture
If there are more than 16 programs, a new series of programs
from 17th program will be displayed in turn, overwriting the
previous screen until all the programs be displayed, and then
recycle.
Press the DYNAMIC button, the
corresponding program is displayed
on the main screen.
!
(4)