13. Signal source selection
If you previously watch programs in
RF mode and now you want to watch
HDTV programs, please first press the
AV/TV button (4) call up the signal
source selection menu, press the CH
or CH button (3) to select HDTV-XGA
or YPbPr, and press VOL or VOL
button (2) to confirm your choice. Later
you can directly press HD/TV button (5)
to switch between the previous RF mode
and HDTV mode.
If your selected terminal has no input signal source, the
screen will display "NO SIGNAL".
At this time please press MENU button (1) to call up
HDTV SOURCE menu, press CH or CH button (3) to
select the other terminal which has signal input and press
MENU button (1) to confirm. Then you can enjoy the program
If both the XGA and YPbPr have signal source and you want to switch from the current signal
source to the other signal source (for example, you are watching XGA program and then you want to
watch program from YPbPr), please press MENU button (1) to call up the main menu, press CH or
CH button (3) to select ( XGA YPbPr), then press MENU button (1) the signal source is
switched over.
Moreover, there is only one group of audio input terminals in HDTV mode, therefore you can
only select to connect either XGA or YPbPr audio terminals.
(2)
(3)
(1)
(3)
(2)
NO SIGNAL
RF
VIDEO1
VIDEO2
VIDEO3
YCbCr
HDTV-XGA
YPbPr
(4)
(5)
HDTV SOURCE
XGA INPUT
YPbPr INPUT