Filter
Top Products
(2)
(3)
(3)
(2)
(4)
(1)
(2)
(3)
(3)
(2)
(4)
(1)
7.4 Fine Tune
7.3 To skip unnecessary position numbers
After presetting the channels, you can
skip unnecessary position numbers so that
only the channels you want to watch are
selected with CH or CH button.
1)
2)
3)
4)
Press the number button (4) or CH
button (3) to select a channel number
you want to skip.
Enter into the PRESET menu, press CH
button (3) to select SKIP.
Press VOL button (2) to select
SKIP (ON). Thus, when you select
channels with CH button (3), this
channel will then be skipped.
To restore a skipped position number, select the position number you want to restore with the
number buttons, enter into the PRESET menu to select SKIP X (OFF).
When picture and sound's effect of a channel is poor (for example, one or two CATV channel's
picture and sound are not standard), you can correct them by making use of Fine Tuning.
7.4.1 AFC (Auto Frequency Control)
Press the number buttons (4) or CH
button (3) to select the channel you
want to fine-tune.
Enter into the PRESET menu, press
CH button (3) to select AFC, then
press VOL button (2) to select AFC
to activate it, the set begins fine-tune
until the optimum picture and sound is
achieved.
To use AFC is recommended. If you are not satisfied with the effects after the AFC, you can shut
down AFC and make use of FINE TUNE until you get satisfied effect.
1)
2)