Filter
Top Products
(2)
(3)
(1)
(4)
(3)
(2)
14.6 Function menu item's selection
14.7 Audio adjustment
14.5 Screen adjustment
The screen adjustment includes H-SIZE, H-PHASE, V-SIZE, V-PHASE, PIN-BALANCE,
PINCUSHION, TRAPEZOID, PARALLELOGRAM. H-MOIRE, V-MOIRE, ROTATION, etc.
1.
2.
3.
4.
5.
6.
7.
Press MENU button to call up the main
menu, press CH or CH button to move
the cursor to SCREEN ADJUST icon.
Press MENU button again to enter into
SCREEN ADJUST sub-menu.
Press CH or CH button to move the
cursor and select your wanted menu item.
Press MENU button to confirm the choice. If
the value of the item is adjustable, go to the
next step, otherwise go to above 3 step after
completion of switch operation if you want to
continue the adjustment.
Press CH or CH button to adjust the level until you are satisfied.
Press MENU button to exit this item's adjustment.
Repeat the above 3-6 steps to adjust other items. After completion of adjustment, select EXIT icon
or press TEXT/IMAGE button to exit the SCREEN ADJUST menu. Or you can wait for some time
and the OSD will automatically disappear.
RECALL: It's used to restore parameters of the current display mode to factory default setting.
EXIT: It's used to exit the current OSD menu.
DEGAUSS: It's used to activate the degaussing circuit. (To conduct the next degauss operation you
should wait for 10-20 minutes).
6500: It's used to set the state of colour temperature which suits for professional departments such as
television and broadcast station.
9300: It's used to set the state of colour temperature which suits for general user.
To adjust Bass, Treble, Surround sound, Balance, please switch to RF mode and operate them
(please refer to Sound adjustment on page 23 and 24 ). The audio effects you get in RF mode also
function in HDTV mode.