Filter
Top Products
TV cabinet creaks
16. Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to
the trouble you are experiencing.
The screen has no content, the power
indicator is not lit up.
The screen has no content, the power
indicator is red.
Poor colour, poor tint
Stripes appear on the screen
Spots appear on the screen
Double images or "ghosts"
Snowy picture
The remote controller does not work
Magnetisation phenomenon, colour
spots in the screen.
Be sure the power cord is plugged in.
The set is in stand-by mode. Press the power button on the
remote controller to turn on the set.
Contrast, colour, tint are not correctly adjusted.
Possible interference of electronic interference from another
TV set, a computer, an electronics game machine, a
broadcast station, etc.
Possible interferences of automobiles, motorcycle, trolley bus,
neon lamps, etc.
This may be caused by reflections from nearly mountains or
buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or comes off.
Check the antenna direction.
The batteries may be worn out.
The batteries may be installed with their polarity reversed.
Even if the picture or sound is normal, changes in the room
temperature sometimes make the TV cabinet expand or contract,
making a noise. This does not indicate a malfunction.
Using the remote controller to turn off the set or moving the set
around may result in magnetisation phenomenon. When
magnetisation appears, please enter into the OPTION menu
and select DEGAUSS item to degauss the set (recommended).
Or by switching off the set and waiting for 10 minutes before
switching on again can eliminate it.
Symptoms
Check the following items