Panasonic AJ-D850A VCR User Manual


 
Automatic editing (deck to deck)
– 34 –
Match frame processing function
When using two VTRs for editing, a total of four edit points—namely, the player’s IN and OUT
points and the recorder’s IN and OUT points—need to be entered. However, since the last
edit point is calculated automatically, only three of these edit points must be entered.
Negative duration function
This function is used by combining setup menu No. 301 (IN/OUT DEL) and No. 302 (NEGA
FLASH) described on page 63.
Entering the edit points
1
Search for the edit IN point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
2
Press the SET button while holding down the IN button.
The edit IN point is now entered.
The edit IN point value now appears on the display.
3
Search for the edit OUT point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
4
Press the SET button while holding down the OUT button.
The edit OUT point is now entered.
The edit OUT point value now appears on the display.
1, 32, 4