Filter
Top Products
Setup menus
– 56 –
SYSTEM menu
<SYSTEM> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
10 AV PHASE 0000 –128
..
..
..
0128 0
..
..
..
0255 127
20 SYS H 0000 FULL
RANGE
0001 FINE
21 SYS H 0000 –3
OFFSET 0001 –2
0002 –1
0003 0
0004 1
0005 2
0006 3
30 MENU 0000 OFF
LOCK 0001 ON
The underline on the setting item denotes the initial setting.
This adjusts the audio output phase with respect to the video
output: 20.8 µs steps
–: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the video
output.
This selects the adjustable range for SYSTEM H during when
the ENCODER REMOTE is connected.
0: ±8 µ sec (±30 steps)
1: –1.9 to +2.7 µ sec (–7 to +10 steps)
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase adjustment: 4.48 µs steps
0: –13.4 µ sec
1: –8.96 µ sec
2: –4.48 µ sec
3: 0 sec
4: +4.48 µ sec
5: +8.96 µ sec
6: +13.4 µ sec
<Note>
Factory settings will remain unchanged even if an attempt is
made to perform a setting operation.
This selects whether the system file lock mode is to be
engaged or released.
0: The lock is released (file data can be changed).
1: The lock is engaged (file data cannot be changed).